Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!ut-sally!husc6!panda!genrad!decvax!tektronix!tekgen!stephenc
From: stephenc@tekgen.UUCP (Stephen Coan )
Newsgroups: net.micro.cbm
Subject: RS-232 schematic correction
Message-ID: <381@tekgen.UUCP>
Date: Tue, 16-Sep-86 11:57:23 EDT
Article-I.D.: tekgen.381
Posted: Tue Sep 16 11:57:23 1986
Date-Received: Fri, 19-Sep-86 22:04:18 EDT
Organization: Tektronix, Inc., Beaverton, OR
Lines: 16
Keywords: RS-232 RS232

Sorry for the error in the schematic.  I gave the original to someone who
wanted to lay it out on a cad system, and I didn't fully check it out when
he gave me the cad output.  The pin that was labeled "O" should be "D".  A
real easy error on my & his part in trying to read my hand drawn schematic.

I hope that this has not caused anyone problems.  I have reviewed the
posted schematic against the original, and that was the only problem that I
could find.  Cheers!
	
	Stephen Coan
	tektronix!tekgen!scargo!stephenc
-- 

			Steve Coan
			tektronix!tekgen!stephenc
			(503) 627-1794