Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site aesat.UUCP
Path: utzoo!aesat!rwh
From: rwh@aesat.UUCP (Russ Herman)
Newsgroups: net.micro.cbm
Subject: MW-350 ROM V1.6  Review
Message-ID: <495@aesat.UUCP>
Date: Tue, 5-Nov-85 19:20:33 EST
Article-I.D.: aesat.495
Posted: Tue Nov  5 19:20:33 1985
Date-Received: Wed, 6-Nov-85 00:09:46 EST
Organization: AES Data Inc., Mississauga, Ont., CANADA L5N 3C9
Lines: 14

Just received the eagerly awaited V1.6 ROM upgrade. As I have an ADMATE
(BLUE CHIP) printer, this is to produce proper Commodore graphics in the
640 dot world (shared by Mannesman-Tally, HP-Thinkjet, and a lot
of other printers). The good news is, yes, graphics are now the proper
width. The bad news is, tab spacing (POS) is still being done based on
the 480 dot spacing. You'd think a company would run the vanilla CBM
printer test as an acceptance test...
-- 
  ______			Russ Herman
 /      \			{allegra,ihnp4,linus,decvax}!utzoo!aesat!rwh
@( ?  ? )@			
 (  ||  )			The opinions above are strictly personal, and 
 ( \__/ )			do not reflect those of my employer (or even
  \____/			possibly myself an hour from now.)